MULTIMA 2in1

Leibinger MULTIMA 2in1
Leibinger MULTIMA 2in1

Multima 2in1

Combined bottling and canning machine

Wide range
of uses

Filling bottles and cans with one single machine is still an attractive imagination of many beverage manufacturers. At this point we are happy to announce that we have turned imagination into reality.

Our latest evolutionary development the – Leibinger MULTIMA 2in1 – can change from bottling mode to canning mode within one hour or less. You just have to exchange some minor parts.

The Multima 2in1 is a counterpressure long-tube filler. It can be used for various bottle and can formats. The filler can be ordered with an integrated rinser for rinsing out the bottles (for new glass). The can seamer is included; optionally, a crown capper and/or a screw capper can be ordered. The Multima 2in1 uses the same infeed peripherals for cans and bottles. The outlet is separated into a bottle outlet and a separate can outlet after the capper.

Due to its open construction the Multima 2in1 complies with the basic idea of the Hygienic design. Leibinger fillers are all designed and built as mechanically as possible so that the recommended annual maintenance service can be carried out by an experienced technician.

TYPE

2in1 Filler

TECHNOLOGY

counter pressure

multifunctional filling valve

STATIONS

12
18
24
30

PRODUCTS

all beverages

OUTPUT RANGE

1,600 – 12,000 bph

O2 PICKUP

10-60 ppb

Rahmen

Frame

The Leibinger base frame eliminated as many horizontal surfaces as possible, allowing excess water or product to drain away at all times. This complies with the idea of the Hygienic Design.
Flaschendusche

Bottle shower

The bottle shower washes off the bottle after the filling and capping process to remove impurities from the bottles and lids.
Dosendusche

Can shower

The can shower rinses the can after the filling and sealing process to remove impurities from the can and lid.
HDE

HPI

The HDE (high pressure injection) causes a virtually imperceptible jet of water to be shot into the product. This causes the product to foam which displaces the oxygen to the top. Due to the low oxygen exposure, the product retains a long shelf life.
Kronkorker

Capper

We use a curved crown corker with 2, 4 or 6 capping stations. Since this operates entirely mechanically, maintenance can be performed directly by the machine operator.
Füllventil Multima Langventil

Filling valve

Our bottling / canning valves (long tube) are developed exclusively mechanically. This ensures a long service life on the one hand, and on the other hand allows the machine operator to intervene or repair the machine at any time without a service technician.
Karusell Abspritzung

Carousel spraying

Carousel spraying is used for the short-term removal of e.g. sticky product residues or broken fragments. The production itself is seldom interrupted.
Flaschensprerre

Bottle stop

The bottle stop prevents further bottles from running in after the filling process has been stopped in the normal way. This prevents open, filled bottles from remaining in the filler carousel. The filler runs empty.
Dosensperre

Can stop

The can stop prevents further cans from running in after the filling process has been stopped in the normal way. This prevents open, filled bottles from remaining in the filler carousel. The filler runs empty.
CO2-Tunnel

CO₂ Tunnel

In the CO₂ tunnel, the open cans are transported to the capper without the product becoming oxygen-conterminated.
Bubble-Breaker

Bubble-Breaker

The bubble breaker blows off the upper, oxygen-contaminated foam layer by means of a targeted CO₂ jet. This prevents oxygenation.

More features

Manufacturing

Our machines are 100% assembled in our own factory. The materials used are predominantly made of stainless steel and food-grade plastics and elastomers. We take care to consult only local manufacturers and thus further strengthen the economy of our location.

CIP

Our filling machine is CIP capable. It is possible to clean the machine with acid and alkali concentrations as well as with steam thanks to a closed circuit system equipped with rinsing caps and sealing materials.

Panel

Our Siemens-based control system can be operated intuitively, similar to a smartphone. The machine can be operated via the HOME button.

Safety housing

We use a free-standing safety enclosure made of frameless non-splintering safety glass (Makrolon). All machine areas are accessible through electrically and mechanically secured doors.

Key Facts

Bubble-Breaker
Bubble-BreakerThe bubble breaker blows off the upper, oxygen-contaminated foam layer by means of a targeted CO₂ jet. This prevents oxygenation.
CO₂ Tunnel

CO2-TunnelIn the CO₂ tunnel, the open cans are transported to the capper without the product becoming oxygen-conterminated.

Can shower
Can showerThe can shower rinses the can after the filling and sealing process to remove impurities from the can and lid.
Can stop
Can stopThe can stop prevents further cans from running in after the filling process has been stopped in the normal way. This prevents open, filled cans from remaining in the filler carousel. The filler runs empty.
Bottle shower
Bottle showerThe bottle shower washes off the bottle after the filling and capping process to remove impurities from the bottles and lids.
Bottle stop

Bottle stopThe bottle stop prevents further bottles from running in after the filling process has been stopped in the normal way. This prevents open, filled bottles from remaining in the filler carousel. The filler runs empty.

HPI

HPIThe HDE (high pressure injection) causes a virtually imperceptible jet of water to be shot into the product. This causes the product to foam which displaces the oxygen to the top. Due to the low oxygen exposure, the product retains a long shelf life.

Carousel spraying
Carousel sprayingCarousel spraying is used for the short-term removal of e.g. sticky product residues or broken fragments. The production itself is seldom interrupted.
Capper

CapperWe use a curved crown corker with 2, 4 or 6 capping stations. Since this operates entirely mechanically, maintenance can be performed directly by the machine operator.

Filling valve
Filling valve Multima long valve Our bottling / canning valves (long tube) are developed exclusively mechanically. This ensures a long service life on the one hand, and on the other hand allows the machine operator to intervene or repair the machine at any time without a service technician.
Frame

FrameThe Leibinger base frame eliminated as many horizontal surfaces as possible, allowing excess water or product to drain away at all times. This complies with the idea of the Hygienic Design.

Manufacturing

Our machines are 100% assembled in our own factory. The materials used are predominantly made of stainless steel and food-grade plastics and elastomers. We take care to consult only local manufacturers and thus further strengthen the economy of our location.

CIP

Our filling machine is CIP capable. It is possible to clean the machine with acid and alkali concentrations as well as with steam thanks to a closed circuit system equipped with rinsing caps and sealing materials.

Panel

Our Siemens-based control system can be operated intuitively, similar to a smartphone. The machine can be operated via the HOME button.

Safety housing

We use a free-standing safety enclosure made of frameless non-splintering safety glass (Makrolon). All machine areas are accessible through electrically and mechanically secured doors.

RINSE

FILL

CAP

Options

Bottle shower

Pneumatic container stop

HPI Heater (High Pressure Injection)

Flushing device

Additional container format sets

Spare part package

Remote access

+ more options and individual features available on request

Technical Details

Rated power

1,600 – max. 12,000* Containers/h (330 ml / 12 oz)

Conveyor belt height

1,000 mm

Beverage pump type

Rotary rotor pump, stainless steel

PLC

Siemens S7

Connected load

400 V / 50 Hz / 3 Ph**

Drive unit

0.75 – 3 kW

Hygienic Design

A round tube frame instead of conventional table plate.

*product specific **country specific

Container (Bottle/Can) and Fill Level

Adjustment through exchange of:

Filling tubes

Container guiding parts

Centering bells

Materials

Mainly used materials:

Stainless steel (1.4571 or 1.4404)

Food safe plastics (z.B. POM or PTFE)

Food safe elastomer (z.B. EPDM)

Piping in stainless steel (1.4404)

Reliability

Components are predominantly mechanical, which provides easy maintenance and a long service life.

Saving labor cost

To reduce labor costs pre-installed programs are available for:

Automatic operation

CIP cleaning

Safety housing

The doors consist of frameless safety glass (Makrolon). All machine areas are accessible through safety doors or removable covers.

Further characteristics

All guiding stars secured by central friction clutch

Mechanical lifting cylinders

Integrated conveyor belt through the full course of the machine

Designed for CIP cleaning

Central lubrication system

User friendly operating panel (HMI)

Complies with all CE requirements at the date of shipment

Hygienic Design®

Our Hygienic Design® concept eliminates as many horizontal surfaces as possible.

The result: a round tube construction as a replacement for the classic table top.

Leibinger Hygienic Design Tisch

Customers with Leibinger Equipment

Request MULTIMA 2in1

We are looking forward to helping you! Please use the contact form for general requests and the inquiry form, if you´d like to get detailed information about our filling machines.


    WHEREVER YOU ARE

    Leibinger Remote Service

    With the Leibinger Remote Service we can remotely help you to repair your machines yourself.