MULTIMA LC

Multima Can LC
Multima Can LC

Multima LC

Canning machine

Wide range
of uses

The Multima LC is a classic long-tube filler for carbonated beverages to be filled into cans. With the aid of can form parts, the Multima LC can handle all common can formats SLIM / SLEEK / STANDARD. Non-carbonated beverages can also be filled into cans by means of a nitrogen drop system.

The can seamer is integrated into the machine and is located at the outlet of the filler and is permanently connected to it. Thanks to its numerous well-designed gassing devices, filling is possible with minimum oxygen pickup.

Due to its open construction we comply with the basic idea of the Hygienic design. Leibinger fillers are all designed and built as mechanically as possible so that the recommended annual maintenance service can be carried out by an experienced technician.

TYPE

Canning Machine

TECHNOLOGY

counter pressure

long tube

STATIONS

6
12
18
24
30

PRODUCTS

all beverages

OUTPUT RANGE

500 – 12,000 cph

O2 PICKUP

10-60 ppb

Rahmen

Frame

The Leibinger base frame eliminated as many horizontal surfaces as possible, allowing excess water or product to drain away at all times. This complies with the idea of the Hygienic Design.
Dosendusche

Can shower

The can shower rinses the can after the filling and sealing process to remove impurities from the can and lid.
HDE

HPI

The HDE (high pressure injection) causes a virtually imperceptible jet of water to be shot into the product. This causes the product to foam which displaces the oxygen to the top. Due to the low oxygen exposure, the product retains a long shelf life.
Bubble-Breaker

Bubble-Breaker

The bubble breaker blows off the upper, oxygen-contaminated foam layer by means of a targeted CO₂ jet. This prevents oxygenation.
Füllventil Multima Langventil

Filling valve

Our can valves (long pipe) are developed exclusively mechanically. This ensures a long service life on the one hand, and on the other hand allows the machine operator to intervene or repair the machine at any time without a service technician.
CO2-Tunnel

CO₂ Tunnel

In the CO₂ tunnel, the open cans are transported to the capper without the product becoming oxygen-conterminated.
Karusell Abspritzung

Carousel spraying

Carousel spraying is used for the short-term removal of e.g. sticky product residues or broken fragments. The production itself is seldom interrupted.
Dosensperre

Can stop

The can stop prevents further cans from running in after the filling process has been stopped in the normal way. This prevents open, filled cans from remaining in the filler carousel. The filler runs empty.

More features

Manufacturing

Our machines are 100% assembled in our own factory. The materials used are predominantly made of stainless steel and food-grade plastics and elastomers. We take care to consult only local manufacturers and thus further strengthen the economy of our location.

CIP

Our filling machine is CIP capable. It is possible to clean the machine with acid and alkali concentrations as well as with steam thanks to a closed circuit system equipped with rinsing caps and sealing materials.

Panel

Our Siemens-based control system can be operated intuitively, similar to a smartphone. The machine can be operated via the HOME button.

Safety housing

We use a free-standing safety enclosure made of frameless non-splintering safety glass (Makrolon). All machine areas are accessible through electrically and mechanically secured doors.

Key Facts

Can shower
The can shower rinses the can after the filling and sealing process to remove impurities from the can and lid.
Can stop
Can stop The can stop prevents further cans from running in after the filling process has been stopped in the normal way. This prevents open, filled cans from remaining in the filler carousel. The filler runs empty.
HPI

HPI The HPI (high pressure injection) system ensures that a hardly visible water jet is shot into the product. This causes the product to foam which displaces the oxygen to the top. Due to the low oxygen exposure, the product retains a long shelf life.

Carousel spraying
Carousel sprayingCarousel spraying is used for the short-term removal of e.g. sticky product residues or broken fragments. The production itself is seldom interrupted.
Bubble-Breaker
Bubble-BreakerThe bubble breaker blows off the upper, oxygen-contaminated foam layer by means of a targeted CO₂ jet. This prevents oxygenation.
CO₂ Tunnel
In the CO₂ tunnel, the open cans are transported to the capper without the product becoming oxygen-conterminated.
Filling valve
Filling valve Multima long valve Our can valves (long pipe) are developed exclusively mechanically. This ensures a long service life on the one hand, and on the other hand allows the machine operator to intervene or repair the machine at any time without a service technician.
Frame

FrameThe Leibinger base frame eliminated as many horizontal surfaces as possible, allowing excess water or product to drain away at all times. This complies with the idea of the Hygienic Design.

Manufacturing

Our machines are 100% assembled in our own factory. The materials used are predominantly made of stainless steel and food-grade plastics and elastomers. We take care to consult only local manufacturers and thus further strengthen the economy of our location.

CIP

Our filling machine is CIP capable. It is possible to clean the machine with acid and alkali concentrations as well as with steam thanks to a closed circuit system equipped with rinsing caps and sealing materials.

Panel

Our Siemens-based control system can be operated intuitively, similar to a smartphone. The machine can be operated via the HOME button.

Safety housing

We use a free-standing safety enclosure made of frameless non-splintering safety glass (Makrolon). All machine areas are accessible through electrically and mechanically secured doors.

FILL

CAP

Options

Can shower

Pneumatic can stop

HPI Heater (High Pressure Injection)

Flushing device

Additional can sets

Spare part package

Remote access

+ more options and individual features available on request

Technical Details

Rated power

500 – max. 12,000* cph (330 ml / 12 oz)

Conveyor belt height

1,000 mm +/- 50 mm

Beverage pump type

Rotary rotor pump, stainless steel

PLC

Siemens S7

Connected load

400 V / 50 Hz / 3 Ph**

Drive unit

0.75 – 3 kW

Hygienic Design

A round tube frame instead of conventional table plate.

*product specific **country specific

Container (Bottle/Can) and Fill Level

Adjustment through exchange of:

Filling tubes

Container guiding parts

Centering bells

Materials

Mainly used materials:

Stainless steel (1.4571 or 1.4404)

Food safe plastics (z.B. POM or PTFE)

Food safe elastomer (z.B. EPDM)

Piping in stainless steel (1.4404)

Reliability

Components are predominantly mechanical, which provides easy maintenance and a long service life.

Saving labor cost

To reduce labor costs pre-installed programs are available for:

Automatic operation

CIP cleaning

Safety housing

The doors consist of frameless safety glass (Makrolon). All machine areas are accessible through safety doors or removable covers.

Further characteristics

All guiding stars secured by central friction clutch

Mechanical lifting cylinders

Integrated conveyor belt through the full course of the machine

Designed for CIP cleaning

Central lubrication system

User friendly operating panel (HMI)

Complies with all CE requirements at the date of shipment

Hygienic Design®

Our Hygienic Design® concept eliminates as many horizontal surfaces as possible.

The result: a round tube construction as a replacement for the classic table top.

Leibinger Hygienic Design Tisch

Customers with Leibinger Equipment

Request MULTIMA LC

We are looking forward to helping you! Please use the contact form for general requests and the inquiry form, if you´d like to get detailed information about our filling machines.


     

    WHEREVER YOU ARE

    Leibinger Remote Service

    With the Leibinger Remote Service we can remotely help you to repair your machines yourself.