

Multima 2in1
Combined bottling and canning machine
range of applications
Fill bottles and cans with one machine. This has long been a wish of many producers of beer, soft drinks and even sparkling wine and champagne. We can now fulfill this wish.
Our latest evolutionary development the – Leibinger MULTIMA 2in1 – can change from bottling mode to canning mode within one hour or less. You just have to exchange some minor parts.
The Multima 2in1 is a counter-pressure long-tube filler. It can be used for various bottle and can formats. If ordered with rinser, the bottles are also rinsed. The can seamer is included; optionally, a crown capper and/or a screw capper can be ordered. The Multima 2in1 uses the same infeed peripherals for cans and bottles. The outlet is separated into a bottle outlet and a separate can outlet after the capper.
Due to its open construction the Multima 2in1 complies with the basic idea of the Hygienic design. Leibinger fillers are all designed and built as mechanically as possible so that the recommended annual maintenance service can be carried out by an experienced technician.
multifunctional filling valve
12
18
24
30
all beverages
1,600 – 12,000 bph
10-60 ppb


Frame

Bottle shower

Can shower

HPI

Capper

Filling valve

Carousel spraying

Bottle stop

Can stop

CO₂ Tunnel

Bubble-Breaker
More features
Manufacturing
Our machines are 100% assembled in our own factory. The materials used are predominantly made of stainless steel and food-grade plastics and elastomers. We take care to consult only local manufacturers and thus further strengthen the economy of our location.
CIP
Our filling machine is CIP capable. It is possible to clean the machine with acid and alkali concentrations as well as with steam thanks to a closed circuit system equipped with rinsing caps and sealing materials.
Panel
Our Siemens-based control system can be operated intuitively, similar to a smartphone. The machine can be operated via the HOME button.
Safety housing
We use a free-standing safety enclosure made of frameless non-splintering safety glass (Makrolon). All machine areas are accessible through electrically and mechanically secured doors.
Key Facts

In the CO₂ tunnel, the open cans are transported to the capper without the product becoming oxygen-conterminated.



The bottle stop prevents further bottles from running in after the filling process has been stopped in the normal way. This prevents open, filled bottles from remaining in the filler carousel. The filler runs empty.
The HDE (high pressure injection) causes a virtually imperceptible jet of water to be shot into the product. This causes the product to foam which displaces the oxygen to the top. Due to the low oxygen exposure, the product retains a long shelf life.

We use a curved crown corker with 2, 4 or 6 capping stations. Since this operates entirely mechanically, maintenance can be performed directly by the machine operator.

The Leibinger base frame eliminated as many horizontal surfaces as possible, allowing excess water or product to drain away at all times. This complies with the idea of the Hygienic Design.
Our machines are 100% assembled in our own factory. The materials used are predominantly made of stainless steel and food-grade plastics and elastomers. We take care to consult only local manufacturers and thus further strengthen the economy of our location.
Our filling machine is CIP capable. It is possible to clean the machine with acid and alkali concentrations as well as with steam thanks to a closed circuit system equipped with rinsing caps and sealing materials.
Our Siemens-based control system can be operated intuitively, similar to a smartphone. The machine can be operated via the HOME button.
We use a free-standing safety enclosure made of frameless non-splintering safety glass (Makrolon). All machine areas are accessible through electrically and mechanically secured doors.
RINSE
FILL
CAP
Options
Bottle shower
Pneumatic container stop
HPI Heater (High Pressure Injection)
Flushing device
Additional container format sets
Spare part package
+ more options and individual features available on request
Technical Details
Rated power
1,600 – max. 12,000* Containers/h (330 ml / 12 oz)
Conveyor belt height
1,000 mm
Beverage pump type
Rotary rotor pump, stainless steel
PLC
Siemens S7
Connected load
400 V / 50 Hz / 3 Ph**
Drive unit
0.75 – 3 kW
Hygienic Design
A round tube frame instead of conventional table plate.
*product specific **country specific
Container (Bottle/Can) and Fill Level
Adjustment through exchange of:
Filling tubes
Container guiding parts
Centering bells
Materials
Mainly used materials:
Stainless steel (1.4571 or 1.4404)
Food safe plastics (z.B. POM or PTFE)
Food safe elastomer (z.B. EPDM)
Piping in stainless steel (1.4404)
Reliability
Components are predominantly mechanical, which provides easy maintenance and a long service life.
Saving labor cost
To reduce labor costs pre-installed programs are available for:
Automatic operation
CIP cleaning
Safety housing
The doors consist of frameless safety glass (Makrolon). All machine areas are accessible through safety doors or removable covers.
Further characteristics
All guiding stars secured by central friction clutch
Mechanical lifting cylinders
Integrated conveyor belt through the full course of the machine
Designed for CIP cleaning
Central lubrication system
User friendly operating panel (HMI)
Complies with all CE requirements at the date of shipment
Hygienic Design®
Our Hygienic Design® concept eliminates as many horizontal surfaces as possible.
The result: a round tube construction as a replacement for the classic table top.

Product sheets
Layouts
Request MULTIMA 2in1
We are looking forward to helping you! Please use the contact form for general requests and the inquiry form, if you´d like to get detailed information about our filling machines.
References
WHEREVER YOU ARE
Leibinger Remote Service
With the Leibinger Remote Service we can remotely help you to repair your machines yourself.