Multima L/K

Wide range
of uses

The counterpressure technology of our MULTIMA product line makes it particularly suitable for filling carbonated (CO₂)products like beer, soft drinks and mineral water. Using the integrated vacuum technology, filling with extremely low oxygen uptake is possible in bottles.

The Multima is available as a long-tube (Multima L) or short-tube (Multima K) filler.

If many different bottle formats are run, then a short-tube filler is the ideal solution. This can be easily adapted to frequently changing bottle formats by means of automatic or manual height adjustment. The long-tube filler, on the other hand, is recommended if only a few different bottle types are handled.

The filler can be ordered with an integrated rinser for rinsing out the bottles (for new glass). Additionally, a crown capper and/or a screw crapper can be ordered. The integrated -in part- multi-stage vacuum technology enables bottling with a particularly low oxygen content.

Due to its open construction the Multima L/K complies with the basic idea of the EHEDG-Hygienic design. Leibinger fillers are all designed and built as mechanically as possible so that the recommended annual maintenance service can be carried out by an experienced technician.

AUGMENTED REALITY EXPERIENCE

TYPE

Bottling Machine

TECHNOLOGY

counter pressure

long tube / short tube

STATIONS

6
12
18
24
30

PRODUCTS

all beverages

OUTPUT RANGE

500 – 12,000 bph

DO-2 PICKUP

10-60 ppb

More features

Key Facts

Bottle shower

The bottle shower washes off the bottle after the filling and capping process to remove impurities from the bottles and lids.

Bottle stop

The bottle stop prevents further bottles from running in after the filling process has been stopped in the normal way. This prevents open, filled bottles from remaining in the filler carousel. The filler runs empty.

HPI

The HDE (high pressure injection) causes a virtually imperceptible jet of water to be shot into the product. This causes the product to foam which displaces the oxygen to the top. Due to the low oxygen exposure, the product retains a long shelf life.

Carousel spraying

Carousel spraying is used for the short-term removal of e.g. sticky product residues or broken fragments. The production itself is seldom interrupted.

Capper

We use a curved crown corker with 2, 4 or 6 capping stations. Since this operates entirely mechanically, maintenance can be performed directly by the machine operator.

Filling valve (Long valve)

Our cylinder valves (long tube or short tube) are developed exclusively mechanically. This ensures a long service life on the one hand,
and on the other hand allows the machine operator to intervene or repair the machine at any time without a service technician.

Frame

The Leibinger base frame eliminated as many horizontal surfaces as possible, allowing excess water or product to drain away at all times. This complies with the idea of the Hygienic Design.

Manufacturing

Our machines are 100% assembled in our own factory. The materials used are predominantly made of stainless steel and food-grade plastics and elastomers. We take care to consult only local manufacturers and thus further strengthen the economy of our location.

CIP

Our filling machine is CIP capable. It is possible to clean the machine with acid and alkali concentrations as well as with steam thanks to a closed circuit system equipped with rinsing caps and sealing materials.

Panel

Our Siemens-based control system can be operated intuitively, similar to a smartphone. The machine can be operated via the HOME button.

Safety housing

We use a free-standing safety enclosure made of frameless non-splintering safety glass (Makrolon). All machine areas are accessible through electrically and mechanically secured doors.

Operating direction

Our machines can all be ordered as left- or right-running, and thus fit into any line planning.